Generator Enclosure Repairs
We offer inspection of existing canopies that are in need of repair. After conducting an initial site visit we can advise what is best for your canopy which can include replacement of parts such as doors, exhausts and attenuators etc. We can fit parts on site, paint, re-seal, replace roofs and more depending on the condition of the canopy and requirements.
The following jobs are example projects we have undertaken:
Example 1: Exhaust lagging + roof replacement.
BeforeCustomer was complaining about burning and smoke coming from the canopy when the engine got up to temperature. The exhaust had not been lagged and was burning the rockwool lining inside the canopy.
Example 2: Exhaust + door replacement + canopy refurb.
FinishedNew box type exhaust silencers fitted to a new roof panel that sits over the whole left by the old exhaust. Complete canopy repaint, new door and door furniture. New door sill.
Example 3: New exhaust + canopy refurb.
BeforeBadly corroded canopy, caught in the nick of time for a revamp. Door was falling off, rusting all over and exhaust heavily corroded.
AfterCanopy has been cleaned up and had a fresh coat of paint. New angled trims fitted where necessary, new exhaust and the door repaired.
Example 4: Exhaust re-cladding, canopy refurb, ventilation cowls fitted.
BeforeCanopy in need of repaint. cladding roof installed previously by others over the exhaust. Was getting very hot and melting paint inside. No lagging on internal bellows.
BeforeExhaust missing lagging inside a replacement roof. Exhaust got hot and burnt paint on the old roof.
Example 5: New roof skin, inlet doors, refurb and paint.
AfterNew pre-fabricated inlet doors fitted with new door furniture & hinges. Door shuts cleaned, treated & painted.
AfterNew pre-fabricated fixed blade weather louvre fitted, finished with a coastal spec poly powder coating.
For further information please contact CES at
Unit 5 Chancers Farm, Fossetts Lane, Fordham,
Colchester, Essex, CO6 3NY
tel 01206 240788