Canopy Repairs

We offer inspection of existing canopies that are in need of repair.  After conducting an initial site visit we can advise what is best for your canopy which can include replacement of parts such as doors, exhausts and attenuators etc.  We can fit parts on site, paint, re-seal, replace roofs and more depending on the condition of the canopy and requirements.

The following jobs are example projects we have undertaken:

Example 1: Exhaust lagging + roof replacement.

Before
Customer was complaining about burning and smoke coming from the canopy when the engine got up to temperature. The exhaust had not been lagged and was burning the rockwool lining inside the canopy.
Before
Before
Works
Cutting the roof off, exposing the rockwool lining.
Works
After removing the rockwool lining + exposing the exhaust.
works
Fresh high temp cladding applied to the silencers.
Finished
New roof mounted and fixed, finishing the job.
Finished.
Show More

Example 2: Exhaust + door replacement + canopy refurb.

Before
Canopy with badly leaking roof and exhaust. One of the doors in poor condition.
Before
Before
Exhaust silencer sunk into container roof, badly holed.
Before
Outlet exhaust pipe, heavily corroded, exhaust full of water.
Before
Heavily corroded door + door sills.
Before
Bottom of the door falling apart.
Finished
New box type exhaust silencers fitted to a new roof panel that sits over the whole left by the old exhaust. Complete canopy repaint, new door and door furniture. New door sill.
Finished
Finished
Finished
Finished
Finished
Finished
Finished
Finished
Show More

Example 3: New exhaust + canopy refurb.

Before
Badly corroded canopy, caught in the nick of time for a revamp. Door was falling off, rusting all over and exhaust heavily corroded.
Before
Before
Exhaust in very bad condition.
Before
After
Canopy has been cleaned up and had a fresh coat of paint. New angled trims fitted where necessary, new exhaust and the door repaired.
After
After
After
Show More

Example 4: Exhaust re-cladding, canopy refurb, ventilation cowls fitted.

Before
Canopy in need of repaint. cladding roof installed previously by others over the exhaust. Was getting very hot and melting paint inside. No lagging on internal bellows.
Before
Before
Before
No lagging on bellows
Before
Exhaust missing lagging inside a replacement roof. Exhaust got hot and burnt paint on the old roof.
Before
Before
After
Heat resistant paint around silencer, old lagging removed.
After
New heat resistant cladding.
After
After
After
Repaint + new cowls fitted to the roof to help ventilate the exhaust.
After
After
After
After
After
Heat resistant cladding fitted to the bellows + Turbo.
Show More

Example 5: New roof skin, inlet doors, refurb and paint.

Before
Heavily rusted inlet louvre and canopy body beginning to corrode.
Before
Rear access panel heavily rusted.
Before
Inlet doors falling apart, heavily rusted and collapsing internals.
Before
Roof had been poorly repaired previously and was leaking.
Before
Rusting inlet door
Before
Rusting outlet mesh & exhaust flap.
Before
Heavily rusted inlet louvre.
After
New pre-fabricated inlet doors fitted with new door furniture & hinges. Door shuts cleaned, treated & painted.
After
New inlet doors
After
New exhaust flap, new roof skin & end panel.
After
After
After
New end access panel, full canopy repaint.
After
New inlet door complete with door furniture
After
After
Canopy fully repainted
After
New roof skin, fully sealed.
After
New pre-fabricated fixed blade weather louvre fitted, finished with a coastal spec poly powder coating.
After
New stainless steel outlet mesh.
Show More

For further information please contact CES at

 

OFFICES/ADMIN

Unit 5 Chancers Farm, Fossetts Lane, Fordham,

Colchester, Essex, CO6 3NY

ENGLAND 

tel 01206 240788

email: sales@colengsys.com

After

Canopy fully repainted